Updating Via Wi-Fi Module - LXNAV LX80XX User Manual

Firmware Update
Please note that the update file and update code are a matching pair only
applicable to a particular serial number.
Once the update file is verified the main display unit will reboot and the new firmware is
ready for use.
On first run main display unit will also update all devices connected to 485 bus. This update
will take approximately five minutes on average.
8.1.1

Updating via Wi-fi Module

With the SW version 6.0, it is also possible to make an update without the SD card or USB
stick. Once the internet connection is established, system will automatically give you a
notification that there is a new update available. User has 3 options available update –
which will perform the update, ignore – this message will be ignored and it won't be shown
anymore for this version and later option – which will notify you each time after restart.
Update button will download the version, make an update and give a message "update
successful", after that the system will perform a restart. User will also be asked to make an
update of peripheral devices. We suggest you to confirm it and update all devices.
Page 176 of 192
Version 6.03, May 2017