Network - LXNAV LX80XX User Manual

Operating Modes
Set Threshold to define when engine is running. By default threshold is set to 100%, which
means no engine run will be detected. Lower this value to approximately 80% to detect
engine running. Engine total time will be accumulated and displayed in total time box. If
necessary, total time can be adjusted, to match current engine total time. High ENL starts
logger will start the flight recorder, if this option is enabled.
Threshold setting has no influence on the flight recorded file, it is only important
for the statistics on the instrument, it sets when the engine is recognized, which
resets statistics.
5.1.11.14

Network*

When Wi-Fi option is available, this menu will setup all the parameters for network. Wi-Fi
can be turned ON all the time, on ground only or off completely. Use Wi-Fi state to define
state. SMTP Settings are used to configure server for sending email. It is recommend to
leave it as LXNAV, however user server can be configured. More options will be displayed in
case of other type of server. Flights can also be stored to SeeYou Cloud for which you have
to insert the key of the cloud. Auto upload will automatically upload flights to the SeeYou
Cloud.
Press LIST button to view list of all available networks. Use VIEW button to view more
details about selected network. When connected to a network, item will get blue color.
Page 96 of 192
Version 6.03, May 2017