Delete Waypoint; Task Mode - LXNAV LX80XX User Manual
Gps-navigation system with variometer
Hide thumbs
Also See for LX80XX:
- System installation manual (65 pages) ,
- Installation manual (69 pages)
Table of Contents
Advertisement
Operating Modes
5.6.1.3
Delete waypoint
Press DELETE if you wish to delete Waypoint from your list.
5.7 Task Mode
Task navigation mode is used for task manipulation. Navigation in this page is exclusively to
the selected turn point of the declared task.
A task can be created only from stored waypoints or airports. A task can also be
loaded from stored tasks. A task can will be saved to an active waypoint file (see
Chapter 5.1.5.4 for details how to set an active waypoint file). A task used for
navigation will also be declared in the IGC file.
Navigational pages can be customised by using LXStyler.
Task mode (valid for DEFAULT profile) has five pages. Use the PAGE selector knob to
switch between pages. These pages are designed to suit needs for racing tasks as well as
for assigned area tasks with minimum task time.
Page 123 of 192
Version 6.03, May 2017
Advertisement
Table of Contents
