Hardware - LXNAV LX80XX User Manual

Operating Modes
The lower-middle button will toggle all units between imperial and metric units.
Glider ballast can be entered as:
 overload factor, which is defined as:
overload
 Load, which is entered in kg/m
 Weight of water ballast. If this option is used the weights of the glider and pilot
must be entered. Refer to Chapters 0 and 5.1.2 for more details of how to enter glider
and pilot weights.

5.1.11 Hardware*

Use this menu to define hardware properties such as total energy compensation, vario
indicators layout, compass calibration, FLARM module settings, AHRS settings, Wi-fi module,
NMEA output and data which will be exchanged between the rear and front display units.
Some items may be greyed out when the selected option is not available.
Empty . glider . weight

REFERENCE
2 2
or lb/ft .
Page 74 of 192
 
Pilot . weight Water
. glider . weight
Version 6.03, May 2017
. ballast