Updating Vario Unit Or Vario Indicator; Automatic Vario Update - LXNAV LX80XX User Manual

Firmware Update
Update is also possible at SETUP->ABOUT page, where is the button UPDATE (button is
grey if there are no new Updates available). User can update the LX system with the SW
version or perform a Database update.

8.2 Updating Vario unit or Vario indicator

8.2.1

Automatic vario update

Once you update the main device, after the reboot you get the following message/question:
It is advised to select YES and update the vario unit (V8/V80).
All detected devices will be listed, including 2 vario parts:
 Sensor box (Automatic method)
 V8/V80 indicator (Manual method)
Select both and press UPDATE. Sensor box will be automatically updated in less than a
minute. After that a manual update of the V8/V80 is needed.
Please follow instructions displayed on the LX80/90xx.
Instructions are:
 You will be asked to prepare the micro SD card adapter, press OK
 Then you will be asked to take the micro SD card from the V8/V80 and insert it into
LX80/90xx by using the SD card adapter (If your card inserted in the LX80/90xx
Page 177 of 192
Version 6.03, May 2017