Pan - LXNAV LX80XX User Manual

Navigational page layout
We encourage all users to upload their data to the FlarmNet web site. It is very
easy. All you need is to determine your Flarm device ID which you will find in the
Hardware->Flarm dialogue (see 10.1.6) and then register at FlarmNet.
6.2.1.10

Pan

Pan mode is a special mode where you can freely move around the map; zoom in and zoom
out the map to explore some details along the course. Press PAN button to active this
mode.
A blue cross will be plotted over the screen with info box for given cross position. Move
cross up and down on map using PAGE selector knob. Move cross left and right using MODE
selector knob. Turn ZOOM selector knob to zoom map.
If remote stick is being used move jogger to move map. Press INFO button to change
information for given position of cursor. There are three types of information possible:
information about waypoint in the vicinity, airspace information and current position.
When airspace info is given, press DISMISS button to dismiss zone for selected time
period.
When waypoint or position info is given, press GOTO button to navigate to this point. Press
CLOSE to leave pan mode.
Page 147 of 192
Version 6.03, May 2017