Flights; Flights Declaration; Formatting A Sd Card - LXNAV LX80XX User Manual

Operating Modes
5.1.5.7

Flights

Select the Flights menu item and press the SELECT button. A list of all stored flights will
be shown. The main display unit is capable of storing more than 1000 hours of flight logs.
If a SD card or USB stick is inserted into the main display unit, flights can be copied to it
when the corresponded button is pressed. Flights can be removed from the main display
unit using the DELETE button. Press TO MAIL button to send selected flight to email
address.
If Wi-Fi option is enabled, buttons TO OLC and TO MAIL will be visible. Press the
corresponding button to send selected file to email or to OLC.
OLC upload
TO OLC automatically uploads flight file to OLC. This function is supported also on Logbook
page. First time user has to set parameters such as username and password. This can be
done each time the upload is performed or at: SETUP->PROFILES AND PILOTS->select
profile->press EDIT.
SeeYou Cloud upload:
Upload to SeeYou cloud is automatically performed. User has to insert SeeYou cloud KEY.
This can be done at: SETUP->PROFILES AND PILOTS->select profile->press EDIT.
5.1.5.8

Flights declaration

In this menu point pilot can check the current declaration settings (Pilot, Glider and Task
declared). Flight declaration can be SAVED and also LOADED (.hdr file).
5.1.5.9

Formatting a SD Card

Use this option if the main display unit cannot read SD card. The system uses the same
card format as used by the MS-Windows operating system (FAT).
Windows does not format the SD card properly or a new card may not be formatted
properly. It is recommended to format new SD cards before using them.
Formatting a SD Card will erase the entire contents of the SD card.
Maximum SD card size for old device (built before 2015) is 4gb.
Page 43 of 192
Version 6.03, May 2017
However sometimes