Graphical Final Glide Assistants - LXNAV LX80XX User Manual

Flying with the System
7.2.7

Graphical Final Glide assistants

There are few graphical final glide assistants available:
 Glider range (outside/inside fill)
 Different colours of APTs in near mode list
 Different colours of APTs on the map
 Square symbols
Glider range can be filled outside or inside. Different fill type, colour and opacity can be set
at 5.1.6.4 chapter.
In Near mode arrival altitude is coloured in white, yellow and red.
White final glide shows APT in range at current MC setting.
Yellow final glide shows reachable airports if you decrease your MC to zero.
Red colour means these APTs cannot be reached.
The same colour logic is used for the APTs appearance on the map.
Yellow square indicates final glide at MC 0. Once you reach the green square LX will give
you a message "Task on final glide" with current MC setting.
Page 173 of 192
Version 6.03, May 2017