Assigned Area Tasks (Aat); Version 6.03, May - LXNAV LX80XX User Manual

Flying with the System

Version 6.03, May 2017

7.1.5.1

Assigned Area Tasks (AAT)

In fact an assigned area task is a speed task where the task distance is not exactly defined.
The pilot has limited influence on the task geometry due to larger observation zones
(assigned areas). The pilot decides how far he will fly into each individual area to reach
best average task speed and not finishing the task earlier than the designated task time.
An assigned area task has the same structure as other tasks and all known methods to enter
are the same as described. The only differences are larger observation zones having a
specific geometry. Use the ZONE button (see chapter Error! Reference source not
found.) to modify the individual observation zone.
It is also recommended to use the AAT assistant tools, such as optimal track and AAT
isolines. Optimization is only shown for currently selected assigned area.
When Show optimal track is enabled, small blue arrow is drawn next to aircraft. This
arrow indicates most optimal direction to fly.
Page 166 of 192