Firmware Update
Version 6.03, May 2017
8
Firmware Update
Firmware updates of the main display unit, vario unit or vario indicator can be easily carried
out using the SD Card/USB key. Please visit our webpage
www.lxnav.com
and send us a
request for the firmware update.
Update can be also done through Wi-Fi (if internet connection is established and Wi-fi
module is enabled on the LX system).
You can also subscribe to a newsletter to receive news about the system automatically.
8.1 Updating main display firmware
We will send you an update file and update code. The update code is a string six letters
long and the update file has the .lx8000, .lx8080, .lx9000, .lx9050 or .lx9070
extension. To proceed with the firmware update copy the update file to a SD card or USB
stick and insert it into the main display unit.
Start the main display unit and go to the Setup->Password menu option.
Enter password 89891 and press ENTER.
The system will automatically search for an update file. If more than one update file is
found a selection dialogue will appear.
After the update file is selected an update code must be entered.
Enter the update code which was sent to you.
Page 175 of 192