Entering Assigned Area; Moving Point Inside Assigned Area - LXNAV LX80XX User Manual

Flying with the System
A message will appear. If you confirm this with YES the task will be advanced to the next
turn point and it will recalculate the task taking the optimal fix as the task point.
7.2.4

Entering Assigned Area

Most probably when entering an assigned area auto advance is going to be turned off. The
"Inside zone"
message
lower row. Pressing the CLOSE button will dismiss the inside zone message. The task will
be auto advanced to the next point when leaving the assigned area. If you want to auto
advance to the next turn point earlier you may always press the NEXT button in task mode
(see 7.2.3).
If NEXT is pressed the task is advanced to the next turn point.
When flying in an assigned area it is NOT important when you will advance to next
turn point. The system is always taking into account the most optimal fix inside
the assigned area for the total distance calculation.
7.2.5

Moving Point Inside Assigned Area

If at least one observation zone is defined as an assigned area, it is possible to move the
point within this area. Moving the point will increase or decrease the total task length.
Select the MOVE action within task mode. A dialogue with the current assigned area will be
shown.
will be shown and buttons CLOSE and NEXT will appear in the
Page 171 of 192
Version 6.03, May 2017