Manual Vario Update - LXNAV LX80XX User Manual

Firmware Update
already consists from the SD card adapter and the micro SD card, then you can
simply ignore this message), press OK.
 Copying of the firmware will be performed
 When you get a message with action, please take the micro SD card from the
LX80/90xx and insert into the V8/V80
 V8/V80 will detect the micro SD card and will automatically ask you: UPDATE?...
confirm it with the middle button on the V8/80 which will perform a restart and a SW
update.
 Once the update is successfully booted, you can check your latest version in the
SETUP->ABOUT menu in the V8/V80 vario unit.
 On the LX80/90xx you can terminate the message by clicking the OK button.
A micro SD card adapter is needed for a manual V8/V80 update.
8.2.2

Manual vario update

Download the vario file from
Start the system, insert the SD card and go to the Setup->Password menu option.
Enter password 89891 and press ENTER.
The system will automatically search for an update file. If more than one update file is
found a selection dialogue will appear.
Select appropriate update file and wait until update will finish.
www.lxnav.com and put it on the sd card.
Page 178 of 192
Version 6.03, May 2017