Waypoints And Airports - LXNAV LX80XX User Manual

Operating Modes Version 6.03, May 2017
type. Turn the ZOOM selector knob to change the transparency value. 100% means
completely transparent and only the airspace zone outline will be shown. 0% means
completely solid (not recommended). Image below shows example of combinations of Width
and Colour property and rendering of airspace zone.
You can set separately airspace colour and border for side view and map view, if option
Copy styles to side view is not checked. Press the DEFAULT button to reset these
settings back to default.
5.1.6.3

Waypoints and Airports

The waypoint and airport look and feel is defined in this dialogue. Check the show
waypoints item to enable waypoints and airports display in navigational pages. If this item
is unchecked no waypoints will be displayed. If duplicates is checked, duplicated points
might be shown on map, when same waypoint(airfield) is defined in user file as in airport
database. Use show only airports from database to display only airports from database
on airport mode.
The Max.visible item defines how long waypoint labels and detailed symbols are shown. If
the maximum number of waypoints on the current screen is more than the defined value
only small blue dots will be shown for waypoints and no labels will be drawn.
Font style, colour and size can be defined using the Font style and colour item and the
Font size item. When editing style, turning the ZOOM selector knob will change the font
colour.
Waypoint labels can be setup to give even more detail. Label details can be defined for
each individual waypoint type (all types, all landable, unknown, waypoint, mountain top,
grass airfield, outlanding, glider site, solid airfield, mountain pass, sender, VOR, NDB,
Cooling tower, Dam, Tunnel, Bridge, Power plant, Castle, Intersection, Marker).
Page 55 of 192