Vm(Dtmf) Group-System Setting [3-8-1] - Panasonic KX-TAW848 Features Manual

4.3 Groups [3]
Value Range
Feature Guide References
Feature References
•
Programming References
•
Group Name
Specifies the name of the VM (DPT) group, which will be shown on the display of the extension
that has called the VM (DPT) group. As for the available characters, refer to the character code
table described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance Console.
Default
Value Range
Feature Guide References
Feature References
•
Programming References
•
4.3.12 VM(DTMF) Group—System Setting [3-8-1]
A Panasonic Voice Processing System (VPS) with DTMF Integration can be connected to SLT
ports of the PBX. The SLT ports that are connected to the VPS are called a VM (DTMF) Group.
A maximum of 2 VM (DTMF) Groups can be programmed.
VM DTMF Status Signal—Ringback Tone
Specifies the DTMF status signal the PBX sends to the VPS when the called extension is
ringing.
Default
Value Range
Feature Guide References
Feature References
•
•
Programming References
•
VM DTMF Status Signal—Busy Tone
Specifies the DTMF status signal the PBX sends to the VPS when the called extension is busy.
Default
Value Range
350 Feature Guide
Max. 4 digits (consisting of 0–9)
1.19.1 Voice Mail (VM) Group
4.1.11 Extension Port [1-5]
Not stored.
Max. 20 characters
1.19.1 Voice Mail (VM) Group
4.1.11 Extension Port [1-5]
1
Max. 4 digits (consisting of 0–9, *, and #)
1.19.1 Voice Mail (VM) Group
1.19.3 Voice Mail DTMF Integration
None
2
Max. 4 digits (consisting of 0–9, *, and #)