4.1 Configuration [1]
Feature Guide References
•
4.1.10 LCO Port [1-4] Port Command
Commands for the LCO ports can be programmed.
INS
Puts the port in service.
Default
Value Range
Feature Guide References
Feature References
•
Programming References
•
OUS
Takes the port out of service. This enables a temporal non-use of the port, for example, for the
purpose of repair.
Default
Value Range
Feature Guide References
Feature References
•
Programming References
•
4.1.11 Extension Port [1-5]
Various settings can be programmed for each extension port.
Slot
Indicates the slot position (reference only).
Default
Value Range
Feature Guide References
•
254
Feature Guide
None
Not applicable.
Not applicable.
None
4.1.9 LCO Port [1-4]
Not applicable.
Not applicable.
None
4.1.9 LCO Port [1-4]
Current slot number
Slot number
None