Wireless Xdp Parallel Mode - Panasonic KX-TAW848 Features Manual

group are busy when the group is called, their PSs will not ring but the caller will hear a
ringback tone.
• A PS ring group will only ring one call at a time on its member PSs. If a PS ring group is
ringing one call when another call is directed to the group, the group will appear busy to
the caller. If a call is directed to a specific PS within the group in this situation and the PS
is available to answer calls, the PS will ring as usual.
• The PBX will ring calls for only two PS ring groups at a time. In other words, if two calls
directed to two different PS ring groups are ringing, no other PS ring group calls will ring
until one of the other ringing calls is answered.
• If a PS in a PS ring group has set the DND feature for CO line calls, the PS will not ring for
CO line calls as well as intercom calls directed to the group.
• Compatible PS
A Panasonic KX-TD7680 and KX-TD7690 can be assigned to PS ring groups.
Feature Guide References
1.2.2 Incoming Call Distribution (ICD) Group Features
1.3.1.3 Do Not Disturb (DND)

1.20.3 Wireless XDP Parallel Mode

Description
A portable station (PS) can be used in parallel with a wired telephone, i.e., an analog
proprietary telephone (APT), or single line telephone (SLT), allowing an extension user to make
or receive calls with either the wired telephone or the PS. The PS will use the same extension
number as the wired telephone, and many of the wired telephone's extension settings (Call
Forwarding [FWD], Class of Service [COS], etc.) are also used by the PS.
In order to use a PS in Wireless XDP Parallel mode, the mode must be turned on using the PS.
[Example of Wireless XDP Parallel Mode, Parallel Mode]
Hybrid Port
Wireless Phone
APT
(or any SLT)
Parallel Mode
Extn. 102
PBX
Hybrid
Port
Extension Port
Wired Telephone
(APT, SLT)
Wireless XDP
Parallel Mode
Extn. 103
1.20 Portable Station (PS) Features
Cell Station
PS
Feature Guide 149