Remote Extension Control By User - Panasonic KX-TAW848 Features Manual

1.22 Extension Controlling Features
• Programmable Time
The Alarm Ringing time, the number of alarm repeat times, and Interval time are
programmable through system programming.
• To use the voice message feature:
An MSG card is required and a message must be recorded. An extension assigned as a
manager can record messages. (
message can be assigned for each time mode (
Installation Manual References
Installation Manual
2.5.3 MSG2 Card
User Manual References
User Manual
1.7.1 Timed Reminder

1.22.5 Remote Extension Control by User

Description
Extension users can remotely change the feature settings, such as Call Forwarding (FWD),
and time service mode for their own extensions from inside or outside the PBX using Direct
Inward System Access (DISA) (
can be used only on the extensions which, through Class of Service (COS) programming are
allowed to be controlled remotely.
The following feature settings can be changed:
a)
b)
c)
d)
e)
This feature is also known as Remote Station Control by User.
Conditions
• Extension PIN
An extension personal identification number (PIN) (
Number (PIN) [005]) is required to use this feature. (
Identification Number (PIN)) If the PIN is entered incorrectly three times, the line will be
disconnected.
• Internal Call Block (
perform remote operations on which extensions, i.e., if extension 101 cannot call
extension 201, then it cannot remotely operate extension 201 either.
162 Feature Guide
FWD/Do Not Disturb (DND) (
Log-in/Log-out ( 1.2.2.6 Log-in/Log-out)
Absent Message (
Extension Lock ( 1.8.2 Extension Lock)
Time Service—Changing the Time Mode (day/lunch/break/night) (
Service)
1.1.2.2 Internal Call Block) also determines which extensions can
1.15.5 Outgoing Message (OGM)) A different
1.15.6 Direct Inward System Access (DISA)). This feature
1.3.1 Call Forwarding (FWD)/Do Not Disturb (DND))
1.17.2 Absent Message)
2.2.4 Time Service).
Extension Personal Identification
1.22.1 Extension Personal
2.2.4 Time