Panasonic KX-TAW848 Features Manual page 371

Default
Value Range
Feature Guide References
Feature References
• None
Programming References
• 4.1.12 Extension Port [1-5] Port Command
Extension Name
Specifies the name of the extension. As for the available characters, refer to the character code
table described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance Console.
Default
Value Range
Feature Guide References
• None
Outgoing Preferred Line
Selects the line to be seized after going off-hook to make a call.
Default
Value Range
Feature Guide References
Feature References
• 1.5.5.2 Line Preference—Outgoing
Programming References
• 4.4.4 Wired Extension—Flexible Key [4-1-4]
Incoming Preferred Line
Selects the line on which an incoming call is answered after going off-hook.
Default
Value Range
Starting at 101 (For port 01 of the first extension card that is
installed. Extension numbers are preset for subsequent extensions
by adding one to the previous extension number.)
Max. 4 digits (consisting of 0–9)
Not stored.
Max. 20 characters
ICM
No Line: No line is seized.
Idle: An idle CO line is seized automatically from the programmed
CO line groups.
ICM: An extension line is seized.
F-1–F-12: A CO line programmed for a flexible CO button (F-1–F-
12) is seized. A flexible CO button customized as a Single-CO,
Group-CO, Loop-CO, or G-DN button must be selected.
Ringing Line
No Line: No line is selected. Select a line by pressing the desired
Line Access button to answer a call.
Ringing Line: The longest ringing call is selected.
F-1–F-12: The call arriving at a flexible CO button (F-1–F-12) is
selected. A flexible CO button customized as a Single-CO, Group-
CO, Loop-CO, or G-DN button must be selected.
4.4 Extension [4]
Feature Guide 371