Panasonic KX-TAW848 Features Manual page 433

Feature Guide References
Feature References
• 1.15.6 Direct Inward System Access (DISA)
Programming References
• None
Cyclic Tone Detection
Selects the cyclic tone detection mode. Cyclic tone detection is used to determine the end of
a call for a DISA CO-to-CO line conversation established through an analog CO line.
To change Cyclic Tone Detection, follow the steps below:
1.
Change Cyclic Tone Detection.
2.
Set the status of the MSG2 card to "OUS", then "INS".
Default
Value Range
Feature Guide References
Feature References
• 1.15.6 Direct Inward System Access (DISA)
Programming References
• 4.1.1 Slot [1-1]
Cyclic Tone Option—Tone On Maximum Time
Specifies the maximum duration of the cyclic tone that will be recognized by the PBX. When
the tone sent from the telephone company is shorter than the value set here, the PBX
recognizes it as a tone-on.
To change Cyclic Tone Option, follow the steps below:
1.
Change Cyclic Tone Option.
2.
Set the status of the MSG2 card to "OUS", then "INS".
Default
Value Range
Feature Guide References
Feature References
• 1.15.6 Direct Inward System Access (DISA)
Programming References
• 4.1.1 Slot [1-1]
Fixed
Fixed: The number of times of a tone pattern (a set of tone-on and
tone-off) that the PBX receives is fixed to 4 times in the ranges of:
A C
B D
A B , = 100–1300 ms,
Option: The tone pattern that the PBX receives is optional as
specified in Cyclic Tone Option on this screen.
600 ms
100 + 10 × n (n=1–390) ms
C
C
D D
= A 90 ms, =
C D B
4.5 Optional Device [5]
90 ms
Feature Guide 433