4.6 Feature [6]
Operator (Extension Number)
Specifies the extension number or floating extension number of an incoming call distribution
group to be designated as the tenant operator. When this parameter is left unspecified, a PBX
operator serves as the tenant operator.
Default
Value Range
Feature Guide References
Feature References
•
•
Programming References
•
ARS Mode
Specifies the ARS mode used when making a CO line call.
Default
Value Range
Feature Guide References
Feature References
•
•
Programming References
•
442
Feature Guide
Not stored.
Max. 4 digits (consisting of 0–9)
2.2.3 Tenant Service
2.2.5 Operator Features
4.2.3 PBX Operator [2-2]
Same as System Setting
Off: ARS is disabled.
On for Local Access Operation: ARS operates when an extension
user makes a call using any Idle Line Access method.
On for Any CO Access Operation: ARS operates when an
extension user makes a call using any CO Line Access method.
Same as System Setting: The setting specified in ARS Mode in
System Setting [8-1] is applied.
1.9.1 Automatic Route Selection (ARS)
2.2.3 Tenant Service
4.8.1 System Setting [8-1]