Panasonic KX-TAW848 Features Manual page 355

Programming References
• None
Timing—Waiting Time before Sending Follow on ID
Specifies the length of time the PBX waits before sending the Follow on ID to the VPS after the
VPS has answered a call.
Default
Value Range
Feature Guide References
Feature References
• 1.19.3 Voice Mail DTMF Integration
Programming References
• None
Timing—Waiting Time before Sending VM DTMF Status Signal
Specifies the length of time the PBX waits before sending the DTMF status signal to the VPS
after the VPS has finished dialing.
Default
Value Range
Feature Guide References
Feature References
• 1.19.3 Voice Mail DTMF Integration
Programming References
• None
Others—Call Waiting on VM Group
Enables the queuing of calls when all extension ports of the VM (DTMF) group are busy. (Call
Waiting tone is not sent to any VM port.)
Default
Value Range
Feature Guide References
Feature References
• 1.19.1 Voice Mail (VM) Group
Programming References
• None
Others—FWD to the VPS Sequence
Specifies which DTMF commands the VPS receives from the PBX when a call is forwarded to
the VPS, so that the VPS can answer the call either with a mailbox or in the AA service mode.
It is also possible to send no DTMF signal to the VPS.
Default
Value Range
1.5 s
0.5 s, 1.0 s, 1.5 s, 2.0 s
1.5 s
0.5 s, 1.0 s, 1.5 s, 2.0 s
Enable
Disable, Enable
Answer by Mailbox
None, Answer by Mailbox, AA
4.3 Groups [3]
Feature Guide 355