Slot [1-1] Extension Card Property - Panasonic KX-TAW848 Features Manual

4.1 Configuration [1]
Value Range
Feature Guide References
Feature References
•
Programming References
•
Version
Indicates the version of the installed card (reference only).
Default
Value Range
Feature Guide References
•
4.1.2

Slot [1-1] Extension Card Property

The property for the extension cards can be specified.
SLT Pulse Dial Mode
Selects the type of pulse dial transmission appropriate to your area.
Default
Value Range
Feature Guide References
Feature References
•
Programming References
•
SLT Off Hook Time
Specifies the minimum time required by the PBX to recognize the pulse dial sent from an SLT
as an off-hook signal.
236 Feature Guide
INS: The card is in service.
OUS: The card is out of service.
Fault: The card has been removed from the slot, or is not
communicating with the PBX.
Fault-OVER: The number of CO line and/or extension ports exceed
the system capacity.
Fault-DIF: The card installed in the slot differs from the
programmed card type.
Pre-Install: There is no card in the slot, but the card type is
programmed for the slot.
Idle: There is no card in the slot, nor programming of the card type
for the slot.
None
4.1.6 Slot [1-1] Card Command
Current version number
Version number
None
Normal
Normal, Sweden, New Zealand
None
4.1.1 Slot [1-1]