Trunk Group - Panasonic KX-TAW848 Features Manual

4.8 ARS [8]
Feature Guide References
Feature References
•
Programming References
•
Carrier Access Code
Specifies the carrier access code. The carrier access code can be added to the user-dialed
number by specifying "C" command in Modify Command on this screen.
Default
Value Range
Feature Guide References
Feature References
•
Programming References
•

Trunk Group

Selects the CO line groups that connect to the carrier.
Trunk Group for the Carrier—TRG 01–TRG 64
Enables each CO line group for each carrier.
Default
Value Range
Feature Guide References
Feature References
•
Programming References
•
Authorization Code for Tenant
Specifies an Authorization code for each tenant. The Authorization codes can be added to the
user-dialed number by specifying "A" command in Modify Command on the Carrier tab.
Authorization Code for Tenant—Tenant 1–Tenant 8
Specifies the Authorization code of each carrier for each tenant.
Default
Value Range
Feature Guide References
Feature References
•
450 Feature Guide
1.9.1 Automatic Route Selection (ARS)
None
Not stored.
Max. 32 digits (consisting of 0–9, *, #, and P [Pause])
1.9.1 Automatic Route Selection (ARS)
None
Enable
Disable, Enable
1.9.1 Automatic Route Selection (ARS)
None
Not stored.
Max. 10 digits (consisting of 0–9, *, and #)
1.9.1 Automatic Route Selection (ARS)