Panasonic KX-TAW848 Features Manual page 157

Explanation:
• SMDR data is not deleted even if the PBX is reset.
• If the PBX is reset during a conversation, the call will not be logged by SMDR.
• The following calls are regarded as two separated calls in the SMDR:
– Calls before and after the flash/recall/EFA signal is manually sent during a
conversation
– CO-to-CO line calls by Call Transfer, FWD or DISA (each is logged as both an
"incoming call" and an "outgoing call")
• The PBX waits for a preprogrammed length of time (
for LCOT [208]) after the end of dialing before starting the SMDR timer for outgoing CO
line calls. When the PBX has sent out all dialed digits to the telephone company and this
timer expires, the PBX begins measuring the duration of the call. A display proprietary
telephone (PT) shows the elapsed time of the call. The starting time and the total duration
of the call are logged by SMDR.
• Serial Interface (RS-232C) Parameters
The following communication parameters can be assigned for the Serial Interface (RS-
232C port) (
Baud Rate [800],
Parity Bit [800],
a)
New Line Code: Select the code appropriate for the PC or printer. If the PC or printer
automatically feeds lines with carriage return, select "CR". If not, select "CR+LF".
b)
Baud Rate: Baud rate indicates the transmission speed of data from the PBX to the
PC or printer.
c)
Word Length: Word length indicates how many bits compose each character.
d)
Parity Bit: Parity bit indicates what type of parity is used to detect errors in the string
of bits composing a character. Make an appropriate selection depending on the
requirements of the PC or printer.
e)
Stop Bit Length: Stop bit indicates the end of a bit string which composes a
character. Select an appropriate value depending on the requirements of the PC or
printer.
Installation Manual References
Installation Manual
2.9.1 Connection of Peripherals
Page
Length
Skip
Perforation
Machine
Perforation
RS-232C Parameter—New Line Code [800],
RS-232C Parameter—Word Length [800],
RS-232C Parameter—Stop Bit Length [800]).
1.21 Administrative Information Output Features
Call Duration Count Starting Time
RS-232C Parameter—
RS-232C Parameter—
Feature Guide 157