Panasonic KX-TAW848 Features Manual page 143

Conditions
• After the VPS answers a call, the PBX sends Follow on ID information to the VPS. The
amount of time before the PBX sends this data is programmable.
• After the VPS transfers a call to the PBX via AA service, the PBX sends a DTMF status
signal to indicate the status of the called party. The amount of time before the PBX sends
this status signal is programmable.
• The amount of time (inter-digit time) between each individual DTMF tone sent by the PBX
can be specified through system programming.
• The length of each DTMF tone sent by the PBX can be specified through system
programming.
• By default, each extension's and ICD group's mailbox number is the same as its
corresponding extension number/floating extension number, however, a different mailbox
number can be specified through PBX system programming for each extension and ICD
group. The specified mailbox number will be used when "Mailbox for Extension" is
set to "Programmed Mailbox Number".
• In order to achieve proper recording quality, Data Line Security is turned on automatically
for extensions in a VM (DTMF) group. (
Feature Guide References
1.1.1.4 Intercept Routing
1.3.1.2 Call Forwarding (FWD)
1.11.1 Call Transfer
1.18.2 Flexible Buttons
1.19.1 Voice Mail (VM) Group
User Manual References
User Manual
1.9.3 Voice Processing System
1.10.4 Data Line Security)
1.19 Voice Mail Features
Feature Guide 143