4.8.5
Carrier [8-5]
Carrier
The way to modify user-dialed numbers for connecting the appropriate carrier can be
determined. A maximum of 10 different carriers can be programmed to be used for the ARS
feature.
Carrier Name
Specifies the carrier name. As for the available characters, refer to the character code table
described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance Console.
Default
Value Range
Feature Guide References
Feature References
•
Programming References
•
Removed Number of Digits
Specifies the number of leading digits to remove from the user-dialed number.
Default
Value Range
Feature Guide References
Feature References
•
Programming References
•
Modify Command
Specifies the commands to modify the user-dialed number to access the carrier.
Default
Value Range
Not stored.
Max. 20 characters
1.9.1 Automatic Route Selection (ARS)
None
0
0–15
1.9.1 Automatic Route Selection (ARS)
None
CH
C: Adds the Carrier Access code
P: Inserts a pause and changes to tone (DTMF) signal
A: Adds the Authorization code for a tenant
G: Adds the Authorization code for a CO line group
I: Adds the Itemized Billing code
H: Adds the dialed number after the programmed number of digits
are removed (Home position)
Number: Adds the number
4.8 ARS [8]
Feature Guide
449