Panasonic KX-TAW848 Features Manual page 361

Feature Guide References
Feature References
• None
Programming References
• 4.1.12 Extension Port [1-5] Port Command
Extension Name
Specifies the name of the extension. As for the available characters, refer to the character code
table described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance Console.
Default
Value Range
Feature Guide References
• None
Port Type
Indicates the extension port type (reference only).
Default
Value Range
Feature Guide References
Feature References
• 2.1.1 Extension Port Configuration
Programming References
• None
Telephone Type
Indicates the type of telephone connected to the extension port (reference only).
Default
Value Range
Feature Guide References
• None
Wireless XDP
Specifies the extension number of the PS with which the Wireless XDP Parallel Mode is
established. To enable the Wireless XDP Parallel Mode, the PS must be turned off once and
then turned on after assigning this setting.
Not stored.
Max. 20 characters
Current port type
APT: APT port (PLC)
SLT: SLT port (SLC)
Hybrid: Hybrid port (HLC)
Current connected telephone type
APT: APT is connected.
DSS: DSS Console is connected.
VM: VPS is connected.
SLT: SLT is connected (or no telephone is connected to the Hybrid
or SLT port).
CS: CS is connected.
No Connection: No telephone is connected.
4.4 Extension [4]
Feature Guide 361