Panasonic KX-TAW848 Features Manual page 463

RS-232C: NL Code
Specifies the NL (New Line) code for the printer or personal computer.
If the printer or personal computer automatically feeds lines with a carriage return, select CR
(Carriage Return). If not, select CR+LF (Line Feed).
Default
Value Range
Feature Guide References
Feature References
• 1.21.1 Station Message Detail Recording (SMDR)
Programming References
• None
RS-232C: Word Length
Specifies the number of bits in each byte of a character.
When connecting the KX-TAW848 Maintenance Console to the PBX using an RS-232C cable,
assign the following values to the Serial Interface (RS-232C) port of the PBX:
Word Length: 8 bit, Parity Bit: None, Stop Bit: 1 bit
CAUTION
Do not use the following combinations:
• Word Length: 8 bit, Parity Bit: Space, Stop Bit: 1 bit
• Word Length: 8 bit, Parity Bit: Mark, Stop Bit: 2 bit
• Word Length: 8 bit, Parity Bit: Space, Stop Bit: 2 bit
Default
Value Range
Feature Guide References
Feature References
• 1.21.1 Station Message Detail Recording (SMDR)
Programming References
• None
RS-232C: Parity Bit
Selects a parity bit code that indicates what type of parity is used to detect an error in the string
of bits composing a character.
Make an appropriate selection depending on the requirements of the printer or personal
computer.
Default
Value Range
Feature Guide References
Feature References
• 1.21.1 Station Message Detail Recording (SMDR)
CR+LF
CR+LF, CR
8 bit
7 bit, 8 bit
None
None, Mark, Space, Even, Odd
4.10 Maintenance [10]
Feature Guide 463