Dial Type Selection; Pause Insertion - Panasonic KX-TAW848 Features Manual

1.5 Making Call Features
1.5.4.4

Dial Type Selection

Description
The dialing mode (rotary or tone) can be selected for each CO line through system
programming (
contract with the telephone company).
DTMF (Dual Tone
Multi-Frequency)
Pulse Dial (Rotary)
Conditions
• Pulse to Tone Conversion
It is possible for an extension user to temporarily switch from Pulse mode to DTMF mode
in order to access special services such as computer-accessed long distance calling or
voice mail services. To switch to DTMF mode, wait for a preprogrammed time period
(Default: 5 seconds) after the CO line is connected, or press
on CO lines set to Pulse mode. DTMF mode cannot be changed to Pulse mode.
• It is possible to select a pulse rate for the CO line port which has been set to Pulse mode
( LCOT Pulse Rate [411]). There are two pulse rates: Low (10 pps) and High (20 pps).
• It is possible to assign the minimum duration of the DTMF signal sent to the CO line port
which has been set to DTMF mode (
1.5.4.5

Pause Insertion

Description
A dialing pause of a preprogrammed length (
manually or automatically when dialing.
Manual Insertion: Pressing the PAUSE button.
Automatic Pause Insertion: A pause will be automatically inserted between the user-dialed
codes below and the following digits.
a)
b)
c)
Conditions
• The length of a pause is programmable for each CO line.
• Numbers stored in Memory Dialing can contain pauses.
• Pressing the PAUSE button while dialing a number inserts a pause of the preprogrammed
length.
54 Feature Guide
LCOT Dialing Mode [410]) regardless of originating extension (under
Mode
Numbers dialed by an extension user are transmitted to the CO
line using analog tones.
Numbers dialed by an extension user are transmitted to the CO
line using analog pulses.
Host PBX Access code (
Telephone Company from a Host PBX))
Special Carrier Access code (
Second Dial Tone Waiting code
Description
LCOT DTMF Minimum Duration [412]).
LCOT Pause Time [416]) can be inserted
1.5.4.6 Host PBX Access Code (Access Code to the
1.5.4.7 Special Carrier Access Code)
. This feature works only