4.3 Groups [3]
4.3
Groups [3]
4.3.1
Trunk Group—TRG Settings [3-1-1]
CO lines are grouped into CO line groups. The settings of the CO line groups determine the
settings of their CO lines. A maximum of 64 CO line groups can be programmed.
Main
Group Name
Specifies the name of the CO line group for programming reference. As for the available
characters, refer to the character code table described in section 3.2.1 Installing and Starting
KX-TAW848 Maintenance Console.
Default
Value Range
Feature Guide References
Feature References
•
Programming References
•
COS
Specifies the COS of the CO line group.
Default
Value Range
Feature Guide References
Feature References
•
Programming References
•
•
Line Hunting Order
Specifies the CO line hunting sequence for the CO line group. The hunting sequence can be
programmed to start from the lowest or highest numbered CO lines, or to rotate uniformly
among all CO lines.
Default
Value Range
326
Feature Guide
Not stored.
Max. 20 characters
2.2.2 Group
4.9.1 CO Line Setting [9-1]
1
1–64
2.2.2 Group
4.2.14 Class of Service—COS Settings [2-7-1]
4.9.1 CO Line Setting [9-1]
High -> Low
High -> Low, Low -> High, Rotation