Pc Programming; Installing And Starting Kx-Taw848 Maintenance Console - Panasonic KX-TAW848 Features Manual

3.2

PC Programming

3.2.1 Installing and Starting KX-TAW848 Maintenance
Console
System programming, diagnosis, and data upload/download can be performed with a PC using
the KX-TAW848 Maintenance Console software.
This section briefly describes how to install and start KX-TAW848 Maintenance Console on a
PC which is connected to the PBX via USB.
System Requirements
Operating System
•
Hardware
•
•
•
Installing KX-TAW848 Maintenance Console
Notes
•
•
® ®
Microsoft Windows
®
CPU: 133 MHz Intel
RAM: At least 64 MB of available RAM (128 MB recommended)
Hard disk space: At least 100 MB of space for the installation, and approximately 2
MB of additional space for user files.
1.
Copy the KX-TAW848 Maintenance Console setup file to a local
drive on the PC. (Its icon is shown here, on the left.)
2.
Double-click the setup file to run the installer.
3.
Follow the on-screen instructions provided by the installation
wizard.
To install or uninstall the software on a PC running Windows 2000 Professional or
Windows XP Professional, you must be logged in as a user which is in either the
"Administrators" or "Power Users" group.
When the PBX is first connected to the PC via USB, a wizard should appear and ask
you to select the appropriate USB driver. Browse for and select the KX-TDA USB
driver, which is copied to the local drive during installation.
98 SE, Windows Me, Windows 2000, or Windows XP
®
Pentium or faster
3.2 PC Programming
Feature Guide 201