Caller Id Features; Caller Id - Panasonic KX-TAW848 Features Manual

1.16 Caller ID Features

1.16.1 Caller ID

Description
The PBX can receive Caller ID information (a caller's name and telephone number) from calls
received on CO lines. This information can be shown on a proprietary telephone (PT) display
when receiving a call and can be used to direct calls from specific callers to specific
destinations automatically. Additionally, Caller ID information is logged in the Incoming Call Log
of the extension which received the call, allowing the caller to view a record of incoming calls
or make a call to a person in the call log later.
The PBX can be programmed to modify a caller's telephone number when it is received and,
for example, add a CO Line Access number or add/delete certain digits of incoming telephone
numbers automatically. This allows an extension user to be able to make a call later to a
telephone number logged in his or her call log without worrying about CO Line Access
numbers, area codes, etc.
Notes
•
•
Caller ID to SLT Port:
Caller ID information can also be shown on a single line telephone (SLT) display. This feature
is available only for SLTs compatible with FSK-type Caller ID.
Note
This feature is compatible with ETSI-type FSK and Bellcore-type FSK.
1.
Caller ID-Related Features
Calling Line
Identification (CLI)
Distribution
Incoming Call Log
The term "Caller ID" used in this Feature Guide refers to features that can receive
caller information sent from the telephone company and received on CO lines. Your
network provider may use a different name for this type of service.
To receive Caller ID information, you must subscribe to the telephone company's
Caller ID service and enable Caller ID for the appropriate CO line through system
programming.
Features
Caller ID information received by the PBX is
used to direct calls from specific callers to
specific destinations. The caller's telephone
number and a destination must be assigned
in the System Speed Dialing Table.
Caller information is automatically recorded
in the call log of the extension which received
the call. This information can be used to view
a record of incoming calls or make calls to any
number in the call log.
Description
1.16 Caller ID Features
Details in
• 1.1.1.3 Calling
Line
Identification
(CLI)
Distribution
• 1.16.2
Incoming Call
Log
Feature Guide 113