Audible Tone Features; Dial Tone - Panasonic KX-TAW848 Features Manual

1.23 Audible Tone Features

1.23 Audible Tone Features

1.23.1 Dial Tone

Description
The following dial tones inform extension users about features activated on their extensions:
Each dial tone type has two frequencies, such as dial tone 1A and dial tone 1B.
Tone 1A/1B
Tone 2A/2B
Tone 3A/3B
Tone 4A/4B
Conditions
• Dial Tone Type A/B
Through system programming, it is possible to select dial tone type A or B for dial tones 1
through 4. If "Type A" is selected, all dial tones 1 through 4 will become dial tone type A.
The dial tone type for ARS feature can be selected separately. If "Type A" is selected for
ARS, dial tone 1A will be heard. If "Type B" is selected, dial tone 1B will be heard.
• Distinctive Dial tone
Distinctive dial tone mode can be disabled. In this case, dial tone 1 will be heard.
• Dial Tone Patterns
All dial tone patterns have a default (
• Only dial tone 1 is sent to the extensions in a VM (DPT/DTMF) group. (
Mail (VM) Group)
164 Feature Guide
Type
A normal dial tone is heard when:
a)
b)
Heard when any one of the following features is set.
•
•
•
•
•
•
•
•
•
•
Heard while a called PS is being searched, or when any one of
the following features is performed.
•
•
•
Heard when messages are waiting for the extension.
Description
No features listed for dial tones 2 through 4 has been set, or
Automatic Route Selection (ARS) is used.
Absent Message
BGM
Call Forwarding (FWD)
Call Pickup Deny
Call Waiting
Do Not Disturb (DND)
Extension Lock
Executive Busy Override Deny
Hot Line
Timed Reminder
Account Code Entry
Consultation Hold
Answering a Timed Reminder call with no message
5.2.1 Tones/Ring Tones).
1.19.1 Voice