Extension [4]; Wired Extension-Extension Settings [4-1-1] - Panasonic KX-TAW848 Features Manual

4.4 Extension [4]

4.4 Extension [4]
4.4.1 Wired Extension—Extension Settings [4-1-1]
For each slot in which an extension card is installed, a certain number of extension ports are
displayed. For each extension port, various extension settings can be assigned.
Main
Slot
Indicates the slot position of each extension card (reference only).
Default
Value Range
Feature Guide References
Feature References
•
Programming References
•
Port
Indicates the port number (reference only).
Default
Value Range
Feature Guide References
Feature References
•
Programming References
•
Extension Number
Specifies the extension number of the extension.
To change the extension number of a wired extension, follow the steps below:
1.
2.
When changing the extension number, make sure that the extension port is not in use. If the
extension number is changed while the port is in use, the new extension number will not come
into effect.
Default
Value Range
360 Feature Guide
Current slot number
Slot number
None
4.1.1 Slot [1-1]
Current port number
Port number
None
4.1.11 Extension Port [1-5]
Type the new extension number, then click Apply.
Set the status of the extension port to "OUS", then "INS".
Starting at 101 (For port 01 of the first extension card that is
installed. Extension numbers are preset for subsequent extensions
by adding one to the previous extension number.)
Max. 4 digits (consisting of 0–9)