Automatic Time Adjustment - Panasonic KX-TAW848 Features Manual

Item
Operator/
Local Access
Remote
Maintenance
Number
2.3.4

Automatic Time Adjustment

Description
The PBX clock can be adjusted automatically in the following two ways:
1.
Daylight Saving Time Setting
The start and end dates of Daylight Saving Time can be programmed. The PBX clock will
automatically adjust itself one hour forward or backward at 2:00 A.M. on the programmed
date, if enabled through system programming. At 2:00 A.M. on the start date, the clock will
change to 3:00 A.M., and at 2:00 A.M. on the end date, the clock will change to 1:00 A.M.
Note
If a Timed Reminder (Wake-up call) is set:
2.
Time Information from Telephone Company
Time information can be received when an incoming call with Caller ID which includes time
information is received.
The PBX clock will be adjusted everyday with the first call after 3:05 AM, if enabled through
system programming.
Note
If a Timed Reminder (Wake-up call) is set, the setting will not ring or will ring twice
depending on the adjustment.
Conditions
• Station Message Detail Recording (SMDR) will log call information using the PBX clock so
that the logging time will be overlapped at the end of Daylight Saving Time. (
Station Message Detail Recording (SMDR))
Feature Guide References
1.22.4 Timed Reminder
Parameter
1. 0/9
2. 9/0
Remote
Maintenance Dial
Number
– On the Daylight Saving Time start date, a reminder set for between 2:00 A.M. and
3:00 A.M. will not ring.
– On the Daylight Saving Time end date, a reminder set for between 1:00 A.M. and
2:00 A.M. will ring twice.
Select the feature numbers for Operator Call and Idle
Line Access. These will be either 0 and 9, respectively,
or 9 and 0, respectively.
Enter the complete telephone number of the PBX
(including the country code). When necessary, this
number will be used to access the PBX from a remote
location for maintenance purposes.
2.3 System Data Control
Description
Feature Guide
1.21.1
189