Automatic Call Park
It is possible to select an idle parking zone automatically.
If the specified parking zone is occupied or there is no vacant zone for Automatic Call Park,
the originator will hear a busy tone. Retrying is possible while hearing a busy tone by
selecting another parking zone or a vacant zone.
Call Park Recall
If a parked call is not retrieved within a preprogrammed time period, the Call Park Recall
tone will be heard at the Transfer Recall destination assigned to the extension which
parked the call. If the destination is engaged in a call, the Hold Alarm will be heard.
If a parked CO line call is not retrieved within a preprogrammed time period (Default: 30
minutes), it is automatically disconnected.
Call Park Button
Pressing the Call Park button parks or retrieves a call in a preset parking zone.
Any flexible button can be customized as the Call Park button. It shows the current status
of the preset parking zone as follows:
Slow red flashing
Call Park (Automatic Park Zone) Button
Pressing the Call Park (Automatic Park Zone) button parks a call in an idle parking zone
automatically. Any flexible button can be customized as the Call Park (Automatic Park
Call Park Retrieve Deny
Internal Call Block (
an extension user can retrieve from a parking zone, i.e., if extension 101 cannot call
extension 201, then it cannot retrieve extension 201's parked calls either.
Feature Guide References
1.18.2 Flexible Buttons
User Manual References
1.4.2 Call Hold
1.12.3 Call Splitting
An extension user can speak alternately with two parties, similar to conventional call waiting.
Placing the current call on hold allows the user to speak with the other party.
A call is parked in the preset parking zone
There are no parked calls
22.214.171.124 Internal Call Block) also determines which extensions' calls
1.12 Holding Features