4.10 Maintenance [10]
Default
Value Range
Feature Guide References
Feature References
•
Programming References
•
External Modem Command - Manual Initialization 1–Manual Initialization 5
Specifies the command to manually initialize an external modem. The command specified here
is controlled by PT system programming (External Modem Control [801]). As for the available
characters, refer to the character code table described in section 3.2.1 Installing and Starting
KX-TAW848 Maintenance Console.
Default
Value Range
Feature Guide References
Feature References
•
Programming References
•
4.10.4 Password Setting [10-4]
Passwords authorize the user to program the extension and the PBX by a PT or a personal
computer.
PT System Programming : [Prog **] User Level
Specifies the user level system password to authorize the PT user to access only the permitted
system programming.
Default
Value Range
Feature Guide References
Feature References
•
Programming References
•
PT System Programming : [Prog *#] Administrator Level
Specifies the administrator level system password to authorize the PT user to access all
system programming.
Default
466
Feature Guide
AT&F0Q0E0V1S0=1X0&D0
Max. 80 characters
2.3.1 PC Programming
None
Not stored.
Max. 80 characters
2.3.1 PC Programming
External Modem Control [801]
1234
4–10 digits (consisting of 0–9)
2.3.2 PT Programming
None
1234