4.9 CO & Incoming Call [9]
4.9
CO & Incoming Call [9]
4.9.1
CO Line Setting [9-1]
CO lines can be assigned a name, and grouped into a maximum of 64 CO line groups.
Physical—Slot
Indicates the slot position of each CO line card (reference only).
Default
Value Range
Feature Guide References
•
Physical—Port
Indicates the port number (reference only).
Default
Value Range
Feature Guide References
•
CO Name
Specifies the CO line name which is shown on the extension's display when receiving a call
from the CO line. As for the available characters, refer to the character code table described in
section 3.2.1 Installing and Starting KX-TAW848 Maintenance Console.
Default
Value Range
Feature Guide References
Feature References
•
Programming References
•
Trunk Group Number
Specifies the CO line group number to which the CO line belongs.
Default
Value Range
Feature Guide References
Feature References
•
452
Feature Guide
Current slot number
Slot number
None
Current port number
Port number
None
Not stored.
Max. 20 characters
1.18.4 Display Information
None
1
1–64
2.2.2 Group