Panasonic KX-TAW848 Features Manual page 252

4.1 Configuration [1]
Default
Value Range
Feature Guide References
•
Connection
Indicates the port status (reference only).
This column offers two ways to open the screen to select the port command:
•
•
Default
Value Range
Feature Guide References
Feature References
•
Programming References
•
Dialing Mode
Selects the type of signal used to dial out to the analog CO line.
Default
Value Range
Feature Guide References
•
CPC Signal Detection Time—Outgoing, Incoming
Specifies the length of time required by the PBX to detect a CPC signal on outgoing or
incoming CO line calls before disconnecting the line .
Default
Value Range
Feature Guide References
•
DTMF Width
Selects the length of the DTMF tone sent to the analog CO line.
Default
Value Range
252 Feature Guide
Current port number
Port number
None
Click the desired cell in the column.
Use the arrow keys to select the desired cell in the column, and then click Command.
Current status
INS: The port is in service.
OUS: The port is out of service.
None
4.1.10 LCO Port [1-4] Port Command
DTMF
DTMF, Pulse
None
400 ms
None, 6.5 ms, 8 × n (n=1–112) ms
None
80 ms
80 ms, 160 ms