Panasonic KX-TAW848 Features Manual page 173
Advanced hybrid & wireless pbx
Hide thumbs
Also See for KX-TAW848:
- Features manual (584 pages) ,
- Programming manual (480 pages) ,
- Feature manual (250 pages)
Table of Contents
Advertisement
1.2.
Time Service
Time modes are used by many PBX features to determine how they will function
during different times of day (
time mode (day/lunch/break/night) for each day of the week are programmed in a
Time Table. Each Time Table has a number which corresponds to the tenant number
of the tenant it serves. (Tenant 1 uses Time Table 1, etc.)
[Example of Tenant Configuration]
Tenant 1
Extn. Group 1
Extn. Group 2
Extn. Group 3
Extn. Group 4
Uses Time Table 1
2.
System Management
Each of the following system management items can be assigned to each tenant.
a)
Tenant Operator: Determines the destination for calls directed to the tenant's
operator. If no operator is designated, the PBX operator will serve as the tenant's
operator. (
b)
ARS Mode: Determines under which circumstances Automatic Route Selection
(ARS) operates for calls made by the tenant's extensions — either when a call is
made using the Idle Line Access method, or when any CO Line Access method
is used. (
be programmed to be the same ARS mode assigned to the entire PBX, or turned
off. (
1.9.1 Automatic Route Selection (ARS))
c)
Audio Source for Music on Hold: Determines the audio source for the Music
on Hold heard by the tenant's callers. Either a tone or background music (BGM)
can be used. The audio source for each tenant can also be programmed to use
the same audio source used for Music on Hold assigned to the entire PBX. (
1.12.4 Music on Hold)
3.
Call Blocking
Through Class of Service (COS) programming, it is possible to:
1.
Prevent extensions of one tenant from calling extensions of another tenant.
(Tenant-to-Tenant Call Block)
2.
Limit the CO line groups which can be used by the extensions of each tenant.
(External Call Block)
3.1.
Tenant-to-Tenant Call Block
Using Internal Call Block, certain features, such as making intercom calls, can be
restricted based on the COS assigned to extensions. (
Well-planned COS programming can prevent extensions of one tenant from:
– Calling an extension or doorphone which belongs to another tenant
2.2.4 Time Service). The start and end times of each
Tenant 2
Extn. Group 5
Extn. Group 6
Uses Time Table 2
2.2.5 Operator Features)
1.5.5.3 CO Line Access). The ARS mode for each tenant can also
2.2 System Configuration—Software
1.1.2.2 Internal Call Block)
Feature Guide
173
Advertisement
Chapters
Table of Contents
