Ps Ring Group [3-9] - Panasonic KX-TAW848 Features Manual

4.3 Groups [3]
Programming References
•
Extension Number of the SLT Port Connected to VM 1–24
Specifies the extension number of the SLT ports that belongs to the VM (DTMF) group.
To assign an extension port to a VM (DTMF) group, follow the steps below:
1.
2.
Default
Value Range
Feature Guide References
Feature References
•
Programming References
•

4.3.14 PS Ring Group [3-9]

PS ring group is a group of PS extensions that receives incoming calls. Each group has a
floating extension number and name. One PS can belong to multiple PS ring groups. A
maximum of 32 PS ring groups can be programmed, each containing up to 28 PS extensions.
Floating Extension No.
Specifies the floating extension number of the PS ring group.
Default
Value Range
Feature Guide References
Feature References
•
Programming References
•
Group Name
Specifies the name of the PS ring group, which will be shown on the display of the extension
that has called the PS ring group when Incoming Trunk Call Information Display on this
screen is set to Called Number. As for the available characters, refer to the character code
table described in section 3.2.1 Installing and Starting KX-TAW848 Maintenance Console.
Default
Value Range
358 Feature Guide
None
Type the extension number of the SLT port that belongs to the VM (DTMF) group.
Set the status of the extension port to "OUS", then "INS".
Not stored.
Max. 4 digits (consisting of 0–9)
1.19.1 Voice Mail (VM) Group
4.1.12 Extension Port [1-5] Port Command
Not stored.
Max. 4 digits (consisting of 0–9)
1.20.2 PS Ring Group
None
Not stored.
Max. 20 characters