Steps in configuration
1. You can only make settings in this box if you are logged on as "Administrator". Here, you
decide how you want to change the content of the PLUG.
2. Select the required option from the "Modify PLUG" drop-down list.
3. Click the "Set Values" button.
5.4.19
Ping
Reachability of an address in an IPv4 network
With the ping function, you can check whether a certain IPv4 address is reachable in the
network.
Description
The table has the following columns:
● Destination Address
Enter the IPv4 address of the device.
● Repeat
Enter the number of ping requests.
● Ping
Click this button to start the ping function.
● Ping Output
This box shows the output of the ping function.
● Clear
Click this button to empty the "Ping Output" box.
SCALANCE XB-200/XC-200/XP-200 Web Based Management
Configuration Manual, 07/2016, C79000-G8976-C360-04
Configuring with Web Based Management
5.4 The "System" menu
159