Simatic Time Client - Siemens SCALANCE XB-200 Configuration Manual

Procedure
1. Click the "NTP Client" check box to enable the automatic time setting using NTP.
2. Enter the necessary values in the following boxes:
– Time zone
– IPv4 address of the NTP server
– NTP server port
– Query interval
3. Click the "Set Values" button.
5.4.10.6

SIMATIC Time Client

Time setting via SIMATIC time client
Note
To avoid time jumps, make sure that there is only one time server in the network.
Description
The page contains the following boxes:
● SIMATIC Time Client
Select this check box to enable the device as a SIMATIC time client.
● Current System Time
Shows the current system time.
SCALANCE XB-200/XC-200/XP-200 Web Based Management
Configuration Manual, 07/2016, C79000-G8976-C360-04
Configuring with Web Based Management
5.4 The "System" menu
139