Multicast - Siemens SCALANCE XB-200 Configuration Manual

Configuring with Web Based Management
5.3 The "Information" menu
● Status
Shows the status of each address entry:
– Learnt
– Static
● Port
Shows the port via which the node with the specified address can be reached. Frames
received by the device whose destination address matches this address will be forwarded
to this port.
5.3.10

Multicast

Status of the multicast filter table
This table shows the multicast frames currently entered in the multicast filter table and their
destination ports. The entries can be dynamic (the device has learned them) or static (the
user has set them).
Dependency on the "Base bridge mode"
If you change the "Base bridge mode" the existing entries are lost.
72
The specified address was learned by receiving a frame from this node and will be
deleted when the aging time expires if no further packets are received from this node.
Note
If there is a link down, learned MAC entries are deleted.
Configured by the user. Static addresses are stored permanently; in other words, they
are not deleted when the aging time expires or when the switch is restarted.
SCALANCE XB-200/XC-200/XP-200 Web Based Management
Configuration Manual, 07/2016, C79000-G8976-C360-04