Configuring with Web Based Management
5.4 The "System" menu
● Agent VLAN ID
Select the VLAN ID from the drop-down list. You can only select VLANs that have already
been configured.
In the mode "802.1D Transparent Bridge", this drop-down list is grayed out, see also
"Layer 2 > VLAN > General".
Note
Changing the agent VLAN ID
If the configuration PC is connected directly to the device via Ethernet and you change
the agent VLAN ID , the device is no longer reachable via Ethernet following the change.
● MAC Address
Shows the MAC address of the device. The MAC address is linked to the hardware and
cannot be modified.
Procedure
1. In the input boxes, enter the IP address, subnet mask and the default gateway.
2. Select the assigned VLAN ID from the "Agent VLAN ID" drop-down list.
3. Click the "Set Values" button.
5.4.4
Restart
Resetting to the defaults
In this menu, there is a button with which you can restart the device and the option of
resetting to the factory setting or reset the default settings of various profiles.
90
SCALANCE XB-200/XC-200/XP-200 Web Based Management
Configuration Manual, 07/2016, C79000-G8976-C360-04