Siemens SCALANCE XB-200 Configuration Manual page 43

Login with HTTPS
Web Based Management also allows you to connect to the device over the secure
connection of the HTTPS protocol. Follow these steps:
1. Click on the link "Switch to secure HTTP" on the login page or enter "https://" and the IP
address of the device in the address box of the Internet browser.
2. Check the displayed certificate warning and confirm it if applicable.
The logon page of Web Based Management appears.
3. "Name" input box:
– When you log in for the first time or following a "Restore Factory Defaults and Restart",
– Enter the user name of the created user account. You configure local user accounts in
4. "Password" input box:
– When you log in for the first time or following a "Restore Factory Defaults and Restart",
– Enter the password of the relevant user account.
5. Click the "Login" button or confirm your input with "Enter".
When you log in for the first time or following a "Restore Factory Defaults and Restart",
with the preset user "admin" you will be prompted to change the password.
The new password must meet the following password policies:
– Password length: at least 8 characters, maximum 128 characters.
– at least 1 uppercase letter
– at least 1 special character
– at least 1 number
You need to repeat the password as confirmation. The password entries must match.
Click the "Set Values" button to complete the action and activate the new password.
Once you have logged in successfully, the start page appears.
SCALANCE XB-200/XC-200/XP-200 Web Based Management
Configuration Manual, 07/2016, C79000-G8976-C360-04
enter the user preset in the factory "admin".
With this user account, you can change the settings of the device (read and write
access to the configuration data).
Note
Default user "user" set in the factory
As of firmware version 2.1 the default user set in the factory "user" is no longer
available when the product ships.
If you update a device to the firmware V2.1 the user "user" is initially still available. If
you reset the device to the factory settings ("Restore Factory Defaults and Restart")
the user "user" is deleted.
You can create users with the role "user".
"Security > Users"
enter the password of the default user preset in the factory "admin": "admin".
Configuring with Web Based Management
5.2 Login
43