Siemens SCALANCE XB-200 Configuration Manual page 181

Description of the displayed boxes
The page contains the following boxes:
● Base bridge mode
Note
Changing Base bridge mode
Note the section "Changing Base bridge mode" in this chapter. This section describes
how a change affects the existing configuration.
Select the required mode from the drop-down list. The following modes are possible:
– 802.1Q VLAN Bridge
– 802.1D Transparent Bridge
● VLAN ID
Enter the VLAN ID in the "VLAN ID" input box.
Range of values: 1 ... 4094
The table has the following columns:
● Select
Select the row you want to delete.
● VLAN ID
Shows the VLAN ID. The VLAN ID (a number between 1 and 4094) can only be assigned
once when creating a new data record and can then no longer be changed. To make a
change, the entire data record must be deleted and created again.
● Name
Enter a name for the VLAN. The name only provides information and has no effect on the
configuration.
Length: max. 32 characters
● State
Shows the status type of the entry in the internal port filter table. Here, "Static" means that
the VLAN was entered statically by the user.
SCALANCE XB-200/XC-200/XP-200 Web Based Management
Configuration Manual, 07/2016, C79000-G8976-C360-04
Sets the mode "VLAN-aware" for the device. In this mode, VLAN information is taken
into account.
Sets the mode "VLAN-unaware" for the device. In this mode, VLAN tags are not taken
into account or changed but are forwarded transparently. In this mode, you cannot
create any VLANs. Only a management VLAN is available: VLAN 1.
Configuring with Web Based Management
5.5 The "Layer 2" menu
181