● Capability
Shows the properties of the connected device:
– Router
– Bridge
– Telephone
– DOCSIS Cable Device
– WLAN Access Point
– Repeater
– Station
– Other
● Port ID
Port of the device with which the IE switch is connected.
5.3.12
Fiber Monitoring Protocol
Monitoring optical links
With Fiber Monitoring, you can monitor optical links. The table shows the current status of
the ports.
You set the values to be monitored on the following page: "Layer 2 > FMP".
Description of the displayed values
Port
Shows the optical ports that support fiber monitoring. This depends on the transceivers.
SCALANCE XB-200/XC-200/XP-200 Web Based Management
Configuration Manual, 07/2016, C79000-G8976-C360-04
Configuring with Web Based Management
5.3 The "Information" menu
75