Siemens SCALANCE XB-200 Configuration Manual page 92

Configuring with Web Based Management
5.4 The "System" menu
Description of the displayed boxes
Note
Note the effects of the individual functions described in the sections above.
To restart the device, the buttons on this page provide you with the following options:
● Restart
Click this button to restart the system. You must confirm the restart in a dialog box.
During a restart, the device is reinitialized, the internal firmware is reloaded, and the
device runs a self-test. The settings of the start configuration are retained, e.g. the IP
address of the device. The learned entries in the address table are deleted. You can
leave the browser window open while the device restarts. After the restart you will need to
log in again.
● Restore Factory Defaults and Restart
Click this button to restore the factory defaults of the device and to restart the device. You
must confirm the restart in a dialog box.
The factory defaults depend on the device.
To restart the device with a predefined profile, the buttons on this page provide you with the
following options:
● PROFINET Defaults
Click this button to restore the default settings of the PROFINET profile and to restart the
device. You must confirm the restart in a dialog box. The dialog box displays the settings
specially made for operation with the PROFINET protocol.
● EtherNet/IP Defaults
Click this button to restore the default settings of the EtherNet/IP profile and to restart the
device. You must confirm the restart in a dialog box. The dialog box displays these
settings specially made for operation with the EtherNet/IP protocol.
● Industrial Ethernet Defaults
Click this button to restore the default settings of the Industrial Ethernet profile and to
restart the device. You must confirm the restart in a dialog box. The dialog box displays
these settings specially made for operation in the Industrial Ethernet environment.
92
SCALANCE XB-200/XC-200/XP-200 Web Based Management
Configuration Manual, 07/2016, C79000-G8976-C360-04