Siemens SCALANCE XB-200 Configuration Manual page 73

Description
This table can contain the following columns:
● VLAN ID
Shows VLAN ID of the VLAN to which the MAC multicast address is assigned.
● MAC Address
Shows the MAC multicast address that the device has learned or the user has
configured.
● Status
Shows the status of each address entry. The following information is possible:
– Static
– IGMP
– GMRP
● Port List
There is a column for each slot. Within a column, the multicast group to which the port
belongs is shown:
– M
– R
– I
– –
– F
SCALANCE XB-200/XC-200/XP-200 Web Based Management
Configuration Manual, 07/2016, C79000-G8976-C360-04
The address was entered statically by the user. Static addresses are stored
permanently; in other words, they are not deleted when the aging time expires or
when the device is restarted. These can be deleted by the user.
The destination port for this address was obtained using IGMP.
The destination port for this address was registered by a received GMRP frame.
(Member) Multicast frames are sent via this port.
(Registered) Member of the multicast group, registration was by a GMRP frame.
(IGMP) Member of the multicast group, registration was by an IGMP frame.
Not a member of the multicast group. No multicast frames with the defined multicast
MAC address are sent via this port.
(Forbidden) Not a member of the multicast group. Moreover, on this port may not be
learned dynamically with IGMP.
Configuring with Web Based Management
5.3 The "Information" menu
73